KaVo K-POWERgrip, Инструкция по эксплуатации

Страница: 23 / 33

▶ Grip the shaft with the wrench D, and loosen the nut ① with the socket wrench
E (note: left-hand thread).
▶ Remove the nut ①, ball bearing ② and ring ③.
Assembly
▶ Shove the ring ①, ball bearing ② and nut ③ onto the shaft.
▶ Hold the shaft ① with the wrench D, and screw the nut ② tight with the socket
wrench E (note: left-hand thread).
▶ Shove the ball bearing ① (O-rings to the insive of the handpiece) and sleeves
② and ③ all the way onto the shaft. Make sure that the sleeve ③ is shoved
on from the correct side ④.
Instructions for use K-POWERgrip Handstück 4941
6 Service and Care | 6.2 Servicing
21/29