5
Operation
Note
Note the safety instructions before each use.
5.1
Using/Changing the tool
▶ Grip the handpiece part ②, and turn it and the motor ③ in opposite directions
as indicated by the arrows until the chuck opens completely.
▶ Take the tool or test probe ① out of the chuck.
▶ Insert a new tool or test probe ① into the chuck as far as it will go.
▶ Grip the handpiece part 2, and turn the motor 3 in the direction indicated by
the arrow until the chuck closes completely.
Note
Once you have inserted the tool (insert the tool as far as it will go, tool shaft
length: minimum 16 mm) you need to check the functionality of the chuck. KaVo
recommends a grip test at 50 N.
Note
Only use tools that work properly. Follow the instructions of the tool manufactur‐
er.
5.2
Operation
Note
Unsuitable lighting in the workplace can give rise to what is known as the strobo‐
scope effect.
This simulates tool standstill at certain speeds.
The problem can be solved by providing suitable lighting.
▶ Prior to every use, check the required speed on the control unit and modify it if
necessary.
Instructions for use K-POWERgrip Handstück 4941
5 Operation | 5.1 Using/Changing the tool
15/29
Содержание K-POWERgrip
