KaVo DSEclinical 5198, Инструкция по эксплуатации

Страница: 85 / 100

Instructions for use DSEclinical Typ 5198
6 Service and Care | 6.2 Care
Preparation
Requirement
Suction hoses remain hanging in the holder.
▶
Press the "HYDROclean" button.
ð
The HYDROclean function is in the preparatory stage.
The upper LED flashes rapidly.
Start the HYDROclean function
▶ Press the "HYDROclean" button.
ð
This starts-up the HYDROclean function.
The upper LED flashes slowly.
▶
Plug the suction hoses without connectors onto the hygiene centre. Position
the suction hoses such as to be strain-free (e.g. guide them over the pivot
arm).
The HYDROclean function is completed when the top LED goes dark.
The process can be discontinued at any time by pressing the "HYDROclean"
button.
Tube-washing function (optional)
The tube washing function is an automatic programme for hydromechanical
cleaning and disinfection of the suction hoses of the drainage and separation
system. The cleaning process is carried out by supplying fresh, clear water and
disinfectant. The water is sucked out of the Aquamat through the extraction
point and suction handpiece to the separation system.
Performance of the Tubewashing function:
▪ After surgical treatment
▪ Every evening
The DEKASEPTOL gel is aspirated automatically. If the DEKASEPTOL gel is
empty, two LEDs of the "HYDROclean" button light up and the display shows
an exclamation mark on the "S2" selection button
①
. In order to display the
"Dekaseptol bottle empty" status message, selection button "S2" must be
pressed.
When both LEDs of the „HYDROclean“ key flash, the DEKASEPTOL gel bottle
must be inserted.
85 / 100