KAULIN MFG. CO. Siruba LF-D6, Инструкция / Перечень запасных частей

Страница: 31 / 42

-27-
5.
畫面顯示
E02 The panel displays E02
：
表示控制面板上的
EEPROM
異常，無法正常動
作。
排除方式：更換新的控制板（
FD683
）
It indicates that EEPROM on the control
panel is abnormal,
and cannot work regularly.
Solution: Substitute another new control
panel (FD683).
6.
畫面顯示
E03 The panel displays E03
：
表示圈數檢知器異常，無法正常動作
It indicates that the coil detector is abnormal and cannot work regularly.
畫面顯示
E03
The panel
displays E03
檢查檢知器連接線
(FD657)
是否鬆脫
Check if the detector connection
wire (FD657) is loose.
請重新連接後再測試
Please reconnect and test.
請重新連接後再測試
Please reconnect and test.
檢查電控箱內
連接線是否鬆脫
Check if the connection
wires in the electronic
control box are loose.
更換後再重新測試
Please reconnect and test.
更換後再重新測試
Substitute a new one and test.
更換新的控制板
(FD683)
Substitute a new control board (FD683).
更換新的
I/O
板
(FD678)
Substitute a new I/ O oard(FD678).
更換新的檢知器
(FD680)
Substitute another
new detector (FD680).
No No
Yes
Yes
無法排除
E03
E03 cannot be solved.
無法排除
E03
E03 cannot be solved.
更換後再重新測試
Substitute a new one and test.
7.
畫面顯示
E04 The panel displays E04
：
表示圈數檢知器異常，無法正常動作
It indicates that the coil detector is abnormal and cannot work regularly.
The panel
displays E0
4
檢查檢知器連接線
(FD657)
是否鬆脫
Check if the detector connection
wire (FD657) is loose.
請重新連接後再測試
Please reconnect and test.
請重新連接後再測試
Please reconnect and test.
檢查電控箱內
連接線是否鬆脫
Check if the connection
wires in the electronic
control box are loose.
更換後再重新測試
Please reconnect and test.
更換後再重新測試
Substitute a new one and test.
更換新的控制板
(FD683)
Substitute a new control board (FD683).
更換新的
I/O
板
(FD678)
Substitute a new I/ O oard(FD678).
更換新的檢知器
(FD680)
Substitute another
new detector (FD680).
No No
Yes
Yes
無法排除E0 4
更換後再重新測試
Substitute a new one and test.
畫面顯示
E0 4
E04 cannot be solved.
無法排除E0 4
E04 cannot be solved.