KAULIN MFG. CO. Siruba LF-D6, Инструкция / Перечень запасных частей

Страница: 19 / 42

1. Sewing mode indicator light: When the
indicator light is ON, it indicates the
sewing mode; when the indicator light
is OFF, it indicates the setting mode.
2. Preparation key: It is used to switch
between the sewing mode and the
setting mode.
3. Section: Set sections 1~18.
4. Feeding length: Set the feeding length
for each stitch. The setting values are
5~65. (5 indicates 0.5mm;65 indicates
6.5mm)
5. Stitch setting: Set the number of
stitches that is required for each
section. The setting values are 0~999
stitches.
6. Circulation setting: It can memorize
10 sets of setting values of circulatory
Sewing (A~J).
7. Stitch count: It counts the number of
stitches that is completed.
1. 車縫模式指示燈：指示燈 ON 表示車縫模
式；指示燈 OFF 表示設定模式。
2. 準備鍵：可用於轉換車縫模式或設定模
式。
3. 工程段數：可設定 1~18 工程段數。
4. 送料長度：設定每針送料長度，設定值
5~65 。 (5 表示 0.5mm ； 65 表示 6.5mm)
5. 針數設定：設定每一段工程的所需的針
數，設定值 0~999 針。
6. 循環設定：可儲存 10 組循環縫製設定值
(A~J) 。
7. 針數計數：計數已車縫完成的針數值。
控制盒面板說明
THE ILLUSTRATION OF
THE CONTROL PANEL
-15-