Kato Imer CARRY 107, Руководство по эксплуатации

Страница: 26 / 54

2 INSTRUCTIONS FOR USE
MINIDUMPER
CARRY 107
17
2.7.10 INSTRUCTIONS FOR SELF-LOADING SHOVEL ASSEMBLY. (OPTIONAL)
1 Fit the union tees (A) on the cylinders. Right-hand cylinder with union on bottom connector, left-hand cylinder with
union on top connector.
2 Insert the steel bushings (B) in the bucket and fit the greasing nipple (C). WARNING use special tools to insert the
bushings. WARNING do not use hammers or blunt objects; the welded supports on the bucket might buckle,
compromising the whole assembly.
3 Fit the shovel arms on the bucket using the hexagon head pins (D). Fully tighten the self-locking nut on the pin.
4 Fit the cylinders on the arms (right-hand cylinder on right-hand arm and vice versa) using the special hexagon head
pins (D) and fully tightening the self-locking nut on the pin.
5 Fit the hydraulic pipes on the cylinders following the length indications. Pass the hydraulic pipes L=1100 mm and
L=1300 mm in the special bucket guides; then fit the female quick coupling on the pipe L=1100 mm and the male
quick coupling on the pipe L=1300 mm using the special seal washers.
6 Fit the cylinders on the bucket using the screws (E) and self-locking nuts. DO NOT LOCK the nuts fully home; the
cylinder must be free to turn.
7 Fit the shovel taking care to avoid play in the coupling with the arms.
8 Fit the pipe cover (F) on the back of the bucket using the special screws. Take care in positioning the pipes.
9 Remove the bucket end front cover of the machine, slacken the oil filler plug to depressurise the system.
10 Connect the pipe L=1000 with bend to the distributor (Port G) using the nipples and seal provided. Fit the male
quick coupling to the other end.
11 Connect the pipe L=1000 with straight female terminal to the auxiliary bracket (H). Fit the male quick coupling to the
other end.
12 Clamp the pipes to the frame using the support provided (I) positioning the bridge on the pipe steel sleeve.
13 Tighten the oil tank plug and carry out the pressurising operations, then refit the cover on the machine.
A
A
D
D
L.930
L.1500
L.1300
L.1100
E
E
F
B
C
H
G
I