12
13
Unpacking method
Tool Preparation
Please unpack the case according to your own
packing condition
Place the packing box on
the floor
Lay the packing case flat,
use a claw hammer to pry
open the fastening buckle,
and tap until it is facing up
Cut the straps and using
a screwdriver remove the
screws as shown above (6 in
total).
Lift the top of the packing
case
Remove the base, back
gear, accessories, etc from
the packing case
Cut off the straps, check
the parts and accessories
according to the list of items
Please check carefully that the package came with the proper number of each
tool or accessory. If any item is missing, please contact customer service (service@
katvr.com).
List of Items
Main
Components
Base
Back support
Supporting rods
Safety step
Tools
Accessories
Software
Allen key/Hex key
Open-end wrench
Phillips screwdriver
Level
Including a base shell and a
base plate
2 rods on each side
5mm, 6mm, 1 piece of each
17*19mm, 20mm, 1 piece of each
4 inches
18mm*9mm
Walk mini S owner's
manual
Special shoe covers
Contact us for more information
Hexagon socket button
head Screw M8 X 16
For installation
Cross recessed countersunk
head Screw M4 x8
screw M8 X 16 with 8mm
gasket
KAT Industry
1
Hexagon socket button
head Screw M8 X 20
1
1
1
1
1
1
1
1
1
1
1
1
1
1
For installation
For installation
For installation
