background image

6

7

Placement risks: Do not place this device in the following locations: 
(1)Outdoors with direct sunlight;
(2)Inclined or unstable surfaces;
(3)Exhibition booths made of glass or those that are incapable of meeting the weight
supporting requirements;
(4)Near firefighting equipment or safety exits, etc.

Do not place the device and its other components near fire or heat sources, nor leave it 
directly exposed to the sun.
If you need to change location after installation, be sure to disassemble it in strict 
accordance with the components order, use the same material as the original packaging to 
wrap the device, and choose a high-quality logistics or handling company, otherwise the 
product may be prone to damage. 

Keep the device safely away from liquids or containers holding liquids, and keep it dry. 

Do not insert items into any openings of the device. 

Please turn off the power of the relevant equipment before pulling out the plug. 
Unplug the device before thunderstorms. 
When removing the power cord, be sure to gently pull it out of the plug, and do not pull the 
cord directly. 

Before connecting the device to the socket, please confirm that the actual socket voltage 
is compatible. If the voltages of the two do not match, do not connect the device to the 
power socket. 

If you violate the above safety instructions or carry out other violations, it may cause 
personal injury or adverse consequences, and KAT VR will not be responsible. 

The following health warnings are updated regularly to ensure accuracy and relevance: 

Before use, you need to read the product manual carefully and follow the given instructions. 

We do not recommend prolonged use due to possible physical discomforts afterwards. 

Symptoms of discomfort may be nausea, dizziness, or headaches. If you feel any 
discomfort, please stop using it immediately and do not engage in any activities that 
pose a safety hazard until the symptoms subside. 

Health Warnings

Product Introduction

During the use of this device by a child, a guardian should always be present to ensure that 
they do not experience any of the above discomforts. If it's your first time, shorter periods of 
use are advised. Only when you have adapted to the virtual reality, is it advised to gradually 
increase the length of use. 

If you feel fatigue, hangover or are under the influence of alcohol or drugs, are emotionally 
stressed or anxious, experience headaches or an earache; it is strictly forbidden to use the 
device, otherwise your condition will be aggravated.
Anyone who has the following symptoms when using the device should stop immediately: 
(a)Seizures, loss of consciousness;
(b)eye fatigue, eye muscle twitching, blurriness or other visual abnormalities;
(c)impaired body balance or hand-eye coordination;
(d)lethargy, nausea, excessive sweating, or any symptoms indicating to motion sickness.

Symptoms caused by virtual reality may persist and become more apparent in a few hours. 
For your personal safety, do not drive, operate machinery, engage in other activities that are 
visually or physically demanding or require body balance and hand-eye coordination, until 
full recovery. 

Those who use this device are considered to have full capacity of civil conduct and 
have complied with the aforementioned matters.

KAT Walk mini S is a second-generation Virtual Reality Treadmill tailored entirely for VR Arcades 
and industry training applications. Integrating our enhanced natural walking technology with 
the force of haptic feedback, increased upper-body freedom (additional waist DOF), improved 
hi-tech appearance and a second-gen Control Center, the mini S offers a deeply immersive and 
professional Virtual Reality walking experience.

The KAT shoe covers are designed for the sole purpose of use with the Walk mini and Mini S 
Omni-Directional Treadmills. With use of constant friction, they help to simulate human gait 
cycle. The concave design of the walking platform works in synergy with the shoe covers to 
provide a more natural feeling of walking, greatly increasing immersion. Furthermore, the shoe 
covers serve the purpose of helping you board our device faster, without the need to change 
your shoes.  

Product Description
 Walk mini S Description

 Walk mini S Special Shoe Covers Description 

Содержание Walk mini S


























Отзывы: