STORAGE:
When not in use, the helmet should be stored away
from direct sunlight and sources of heat, and we recommend
putting it back in the original package. Do not apply adhesives,
solvents, stickers, or paint that do not comply with the manufac-
turer's specifications.
Any alteration or intervention not provided for may impair its
protective function.
TRANSPORT:
Given the type of device (helmet), no particular
instructions are necessary for its transport.
LIFE:
The helmet's life depends on various factors which cause
deterioration, including sudden temperature changes, the
degree to which it is exposed to sunlight, and the intensity of
use. Inspect the helmet regularly to check for any damage!
Cracks, detached parts, warping, flaking, and changes in colour
are significant elements for verifying the helmet's state of
deterioration; in any case, we advise replacing it after
5 years, because over time its capacity for protection decreases
due to the aging of the materials. The manufacturing date is
shown on the inside of the helmet.
INSPECTION:
If you should find any cuts, abrasions, or other
damage, contact the manufacturer to have the helmet inspec-
ted before using it again.
LABELLING:
Information contained on the inside of the helmet,
printed on a label, which should not be removed for any reason.
GB
