Illustrations and/or description of inside labels:
DIAGRAM LABELLING
LABELLING REPRODUCTION
LABELLING
Safety helmet for industrial use, altitude works and sanitary service of
emergency and aid. For adequate protection this helmet has to fit or to be
adjusted to the size of the user’s head. The helmet is made to absorb the
energy of a blow by partial destruction or damage, and even though such
damage may not be readily apparent, any helmet subjected to severe
impact should be replaced. The attention of the user is also drawn to the
damage of modifying or removing any of the original component parts of the
helmet, other than as recommended by the helmet manufacturer. Helmets
should not be adapted for the purpose of fitting attachments in any way not
recommended by the helmet manufacturer. Do not apply paint, solvents,
adhesives or self-adhesive labels, except in accordance with instructions
from the helmet manufacturer. For cleaning, maintenance or disinfection,
use only substances that have no adverse effect on the helmet and are not
known to be likely to have any adverse effect upon the wearer, when applied
in accordance with the manufacturer’s instructions and information.
GB
1
MANUFACTURER 6
WEIGHT OF HELMET
2
NAME OF THE MODEL 7
CERTIFICATION SEAL
3 MODEL
DESIGNATION 8
MANUFACTURING DATE
4 APPLICABLE
REGULATIONS
9
IDENTIFICATION
NUMBER
5
SIZE IN CM. 10
SHELL MATERIAL
1 KASK
6
390 gr
2
PLASMA WORK 7
3 SAFETY HELMET FOR INDUSTRIAL USE,
ALTITUDE WORKS AND SANITARY
SERVICE OF EMERGENCY AND AID 8
03.2011
4
EN 397 9
11.1234.0002
5
Adjustable 51-62 cm 10
P P
