HYDRA
FORCE
HYDRAFORCE LIFT STATION AGITATOR MANUAL
14
ASSEMBLY INSTRUCTIONS (CONT.)
17. Feed the free end of the cable (F) through the
cable adjuster (G) and clamp securely in place.
19. Connect cable adjuster (G) to the hatch chain
(A) with the remaining snap hook (
H)
to
position the diffuser within the wet well to
the desired location.
20. Connect the free end of SureSink tubing (J) to the
outlet lead hose on the compressor. Secure with
hose barb and hose clamps from tube fitting kit (K).
SureSink tubing will need provisions to pass
through, or around, the hatch and back to the
compressor. Tubing OD is 0.68".
18. Secure SureSink tubing (J) to the suspension
cable (F) every 3 ft. with the provided cable
ties (L).
To ensure the diffuser is raised and lowered
with the cable and not the tubing, allow
for some slack in the tubing just above the
diffuser.
F
G
17
G
H
A
19
J
J
F
L
18
20
Back to Contents