HYDRA
FORCE
HYDRAFORCE LIFT STATION AGITATOR MANUAL
10
ASSEMBLY INSTRUCTIONS
1. After unpacking your box, the tubing assembly tee's open end will be turned towards the center of the
loop. Twist the tee fitting so the open end faces away from the center of the diffuser loop (P).
Tighten until snug, making sure the blue lines on both diffuser loops (P) face the same direction and are
parallel with the inlet check valve assembly (O).
Using an adjustable wrench, tighten the hose barb (R) into the inlet check valve assembly (O).
2.
Assemble both diffuser loops (P) to the inlet check valve assembly (O).
R
P
O
P
3.
With the blue line on the diffuser loops (P) facing down, attach the double-pronged end of the substrate
(M) around the tee fitting. Rotate up and secure the single-pronged end of the substrate to the opposite
side of the diffuser loop (P).
P
M
3
2
1
Back to Contents
