HYDRA
FORCE
HYDRAFORCE LIFT STATION AGITATOR MANUAL
8
NO-CABINET INSTALLATION (CONT.)
LS-100-NC
LS-150-NC, LS-200-NC, LS-300-NC
PTFE
thread
sealant
Outlet
Remove outlet plug
using 1/4" hex key
Inlet
Connect to
SureSink™ Tubing
No-cabinet systems arrive assembled. To prepare for installation:
1.
Thread the filter maintenance indicator into the top port of the intake manifold block. Hand-tighten and
DO NOT OVER-TIGHTEN. The fitting is made from corrosion-resistant plastic and can be damaged from
excessive force. Thread until snug.
2.
Thread the air filter into the front port of the intake manifold block. Hand-tightening is sufficient.
1
2
Back to Contents
