Karma Morgan Series, Руководство пользователя

Страница: 67 / 116

67
CAUTION
Do not turn the power OFF while driving, as this will lead to an abrupt stop and possible injury.
Do not set the speed dial on high while driving indoors.
Do not adjust the speed dial while driving. A sudden change to the highest speed may endanger
you and cause failure to your wheelchair.
Do not place magnetic devices near the controller, as this may affect the operation of your
wheelchair.
Be careful while driving in heavy traffic and crowded areas.
While reversing the vehicle be aware of the people and objects behind you.
If anti-tippers are standard equipped, DO NOT operate the wheelchair without anti-tippers being
installed. Anti-tippers MUST BE attached at all times.
16.4. Installing the seat assembly on the chassis.
WARNING
For your own security, read and obey all the instructions before proceeding the installation.
If the seat assembly and the chassis are packed in different package when delivered, follow the following
steps to install the seat
：
16.4.1. Captain Seat
Put the captain seat on the chassis (1) and move it forwards (2). (Figure 5.3.19-1)
Ensure the bolt on the chassis to slide into the slot under the seat (1). (Figure 5.3.19-2)
Use one M10*35L button head hex socket screw, lock spring washer and flat washer to fix the seat (3) from
the front of the seat. (Figure 5.3.19-3)
Ensure the seat that is properly fastened on the chassis. You can lift the seat up to test if it ’ s loose. If, yes,
please tighten all bolts.
Connect the controller joystick connector under the seat (2). (Figure 5.3.19-2)
Install the right and left armrest, and the right and left footrest.
Figure 5.3.19-1 Figure 5.3.19-2
Figure 5.3.19-3