Karma Morgan Series, Руководство пользователя

Страница: 102 / 116

102
CAUTION
Before performing any maintenance, be sure to turn the power OFF and unplug the charger if
connected.DO NOT over-tighten any hardware. This could cause damage to the frame and
hardware.
WARNING
After ANY adjustments, repair or service and BEFORE use, make sure that all hardware is
tightened securely, otherwise injury or damage may occur.
19.6. Suggested maintenance procedures
- Before using the powered wheelchair, make sure all nuts and bolts are tight.
- Check all parts for damage or wear and have a qualified technician replace it if necessary.
- Check all parts for proper adjustment.
- Ensure that the batteries are properly maintained and charged as required.
- Inspect brake for proper operation.
- The wheels and tires should be checked periodically for cracks and wear, and should be replaced by a
qualified technician.
- Regularly check for loose nuts and/or bolts in the front and rear wheels. If loose, have them adjusted by a
qualified technician.
- Clean dirt, dust and grease from exposed components.
- A qualified technician can be found with an authorized distributor/ dealer.
20. short and long term storing
- Please refer to Section 5.3.7 Backrest Angle Adjustment to fold the backrest and detach the footrests.
- Carry the body of the wheelchair by the front and back frame using two people. Do not lift the lower body
by the casing or any detachable parts
- Please store the wheelchair in a location where it is out of direct sunlight, rain and dew.
- When stored for a long time, please charge the batteries to full and then disconnect the battery terminals.
- Please ask your local Karma dealer for further details.
CAUTION
When loading or moving the wheelchair in a vehicle, be sure that every part that have been
detached from the wheelchair is placed properly to prevent them from moving. It could damage
the vehicle or the wheelchair.
DO not detach any wiring or the steel wire.