EVM Modules of the MS Series Technical Introduction and User’s Guide
60
Night Mode Auto-Reply:
The EVM can be so programmed that it automatically answers the incoming
calls, announces the night mode entry message you have recorded before
and then records the messages of the calling parties. (Auto-reply)
For the auto-reply mode during the night service:
H
Lift the handset and hear the internal dial tone.
879
Dial 879.
E
Listen to your Night Service message.
G
Replace the handset.
Notes:
1.
In order to activate this feature, the message number “08”, namely the
night mode entry message, must have been recorded and the ACD
service must have been taken off line, as explained in the chapter
“Programming”.
2.
If the ACD is put on line, then a discontinuous dial tone is emitted for 4
secs after the announcement of the night mode entry message is over.
The line is dropped, if the calling party fails to dial a number within that
period.
3.
After this feature is activated, all incoming calls are answered
automatically. A short beep is emitted after the night mode entry
message announcement and then the recording begins.
4.
The recording duration is 30 secs. Following the expiration of that time,
the line is dropped.
5.
If you take the system out of the night service by dialing “878”, then it
reverts to its normal operation mode. Upon activating the night service
by “879”, the feature is put back on line again.
PDF created with pdfFactory Pro trial version
