EVM Modules of the MS Series Technical Introduction and User’s Guide
50
Listening To New Messages (8646):
If there is a new message left for you, then the message “You have got a
message.” is announced when you lift the handset, your telephone rings for
0,5 seconds and stops in every 10 minutes and each time you pick it up and
hang it up in order to warn you, and the dial tone changes to a discontinuous
one.
In order to listen to the messages left for you:
H
Lift the handset and hear the internal dial tone.
8646
Dial 8646.
B
Enter your password, if you have one.
E
Listen to your message.
Notes:
1.
You will start to listen to the messages in succession. In case you
receive the dial tone again, that means you have no recorded messages.
If the EVM is busy at that moment, then the system emits music on hold
or if the music is not active, silence. In that case, you can wait until a
channel of EVM module becomes available and it is connected to you or
you can hang up and try again after a while.
2.
If you do not press any key, then you listen to the messages one after
another in a row and you receive the dial tone after the last message.
3.
During the listening operation:
-
If you dial
0,
then
you return to the beginning of the message you are
currently listening to.
-
If you dial
1,
then
you proceed to the next message.
-
If you dial
2,
then you return to the point that is about 3-3,5 sec
earlier and you go on listening to the same message.
-
If you dial
3,
then, starting from the moment you are in, the voice
level of the message is increased by one unit and you go on listening
to the message.
-
If you dial
4,
then
you go to the point that is about 3-3,5 sec later and
you go on listening to the same message.
PDF created with pdfFactory Pro trial version
