EVM Modules of the MS Series Technical Introduction and User’s Guide
51
-
If you dial
6,
then
starting from the moment you are in, the voice
level of the message is decreased by one unit and you go on
listening to the message.
-
If you dial
8,
then you lock the message you are listening to at that
moment (if you have the required authorization) so that it is not
erased until you listen to it again, and then you proceed to the next
message.
-
If you dial
9,
then you erase the current message and proceed to the
next one.
4.
Any message left for you is automatically erased
15 minutes
after it is
listened to.
5.
The discontinuous dial tone shifts to normal after you listen to the entire
messages. However, that does not mean there is no more message. You
can listen to the same messages again, by the code 8645 (if you have not
yet erased them and if the 15-minute period is not over yet). The dial
tone changes again, if a new message is left while the previous ones are
still there.
Listening To The Entire Messages (8645):
Thanks to this feature, you can listen to the entire messages left for you, no
matter new or old (not erased).
In order to listen to the entire messages in your message box:
H
Lift the handset and hear the internal dial tone.
8645
Dial 8645.
B
Enter your password, if you have one.
E
Listen to your message.
PDF created with pdfFactory Pro trial version