EVM Modules of the MS Series Technical Introduction and User’s Guide
45
USER FEATURES
CALL CONTROL SERVICES
Temporary Absent Message (8648):
You can leave a message to be announced to parties calling you when you
are about to leave your work place.
In order to leave a message to your own phone:
H
Lift the handset and hear the internal dial
tone.
8648F
Dial 8648 and wait for the short beep.
E
Record your message (It cannot be longer
than 30 sec).
G
Replace the handset.
Notes:
1.
If the entire channels of the EVM are busy at that moment, then
emission of the signal is delayed after dialing 8648, and the system
emits music on hold in the meantime.
2.
After recording the message, each extension calling you listens to that
message (your phone does not ring). The calling extension can leave you
a message by dialing 82, if s/he would like to, while listening to the
message you have recorded. (See Leaving A Message To An Extension).
3.
If the call is coming over an external line (if the calls coming over that
line has been forwarded to your phone), then the message you have
recorded is announced and after the signal, the message of the calling
party is recorded. If there is a line ringing on your phone, then you are
supposed to record your message accordingly. You can listen to the
messages left to you by dialing the code 8646 (and then your password, if
you have one) when you come back to your work place.
That condition is cancelled automatically whenever you dial any number
through your phone and the absent message you have recorded into
your phone is erased.
PDF created with pdfFactory Pro trial version
