English
5.906-590.0 Rev. 01 (05/17)
13
The basic unit is characterized by good accessibility and
ease of servicing. It has a self-supporting frame made of
plastic.
Steam boiler, pumps and valves are mounted on a base
support made of stainless steel. The base support can be
tilted out of the appliance towards the bottom so that the
steam group becomes easily accessible.
The waste water tank is accommodated on the right side
of the appliance. It can be removed from the appliance.
A door with a stainless steel cover protects the waste wa-
ter tank. The door is fastened to the appliance by means of
an exchangeable hinge band.
The rear and left appliance covers are made of stainless
steel and can be removed. The appliance covers have a
circular seal to retain ingressing water.
Fresh water and detergent tank are located at the front of
the appliance.
The tanks can be removed from the appliance individually.
The push handle can be dismounted.
Accessory holder, accessory support and cable hooks can
be replaced.
The front plate of the control unit is screwed together with
the appliance and can be dismounted.
An accessory carrier is inserted underneath the upper ap-
pliance cover. The cover of the power electronics and the
fan are accessible underneath the accessory carrier.
The accessory outlet can be dismounted and contains
connections for:
Steam
Control
Suction
The chassis and suspension consists of two rear wheels
on an axle and two steering rollers with parking brake.
1 Handle
2 Faceplate fresh water tank
3 Fresh water tank cover
4 Carry handle
5 Cover fresh water tank
6 Washer
7 Elbow
8 Suction hose
9 Water filter with weight
10 Float
1 Screws
030 Function
040 Service activities
ABAF Uninstall/install cover fresh water tank
