Kärcher SGV 6/5 Скачать руководство пользователя страница 27

Страница: 27 / 73

English

5.906-590.0 Rev. 01 (05/17)

Service group does not contain any maintenance and in-
spection points.

The service group does not contain any peculiarities.

050 Maintenance and inspection

060 Error diagnosis

Findings

Possible cause

Correction

Water in the appliance

Seal for the rear appliance cover dam-
aged.

Replace seal.

Seal for the left appliance cover dam-
aged.
Seal for the cover of the power elec-
tronics damaged

No fresh water or detergent is drawn
in.

Filter in the tank clogged.

Clean or replace the water filter.

Suction hose in the tank clogged or
pulled off.

Check, clean and attach suction hose.

Tank connection, elbow clogged or
damaged.

Check, clean, replace tank connection.

Door of the waste water tank does not
close properly.

Hinge damaged.

Replace hinge band / frame door waste
water tank.

070 Peculiarities/ others

Содержание SGV 6/5










































































Результаты поиска

Содержание SGV 6/5

Отзывы:

Похожие инструкции для SGV 6/5

Бренды по названию

Популярные бренды

Kärcher SGV 6/5, Руководство по обслуживанию

Результаты поиска

Содержание SGV 6/5

Отзывы:

Похожие инструкции для SGV 6/5

Бренды по названию

Популярные бренды