Kärcher HWE 4000 Gas, Руководство пользователя

Страница: 28 / 204

-
6
A Control panel gas burner
B Control panel temperature controller

Press the key for releasing the burner fault.
Note: The info mode can be called up only during the operating
mode in each state of the burner.
 Press the key for approx. 0.5 seconds.
You will see a display with an info number and a value dis-
played after it.
Example: Consumed fuel = 1772 l/m
3
The system goes back to displaying the operating status after info
number 10 or if there is a waiting period of 20 seconds.
To go to the next information:
 Press the key for approx. 0.2 seconds.
Note: The service mode may only be accessed by Customer Ser-
vice.
1 Conditions of the switching outputs Out 1-3
LED 1: Burner capacity is increased
LED 2: Burner capacity is decreased
LED 3: Limit value exceeded
2 LED OK: Is on when the limit value is not exceeded
3 Actual value reading
4 Entry in error list present
5 Set nominal value
6 Call error list (if entry present)
7 Up/Down keys for changing the nominal value
8 PC connection (only for customer service)
9 Steam operation set, changing the nominal value not possible
Colours of the LEDs:
– LEDs 1, 2, 3: yellow
– LED OK: green
– Other LEDs: red
Control elements
Control panel gas burner
Unlocking burner faults
Info mode
Info No. Displayed value
0 Consumed fuel (captured via the input of the im-
pulse counter)
1 Operating hours Stage 1
2 Operating hours Stage 2
3 Number of burner starts that have been carried
out
4 Software no. of the firing manager
5 Creation date of the software
6 Appliance no.:
7 Appliance testing date
8 Current eBUS address
9 Oil monitoring function
10 Current eBUS address of regulator
B
A
–weishaupt–
l/m
3
Service mode
Control panel temperature controller
KS 40-1
burner
SP.x SG
Err
Ada
1 2 3 OK
F
1
2
3
5
4
9
6
7 8
28 EN