Kärcher HDS 13/20-4 S, Инструкция по эксплуатации

Страница: 30 / 397

30
English
– Excessive power consumption.
Î Check main connections and mains
fuse.
Î Inform Customer Service
– Water shortage
Î Check water supply, check connec-
tions.
– The exhaust temperature limiter has
been triggered.
Î Set the appliance switch to "0/OFF“.
Î Allow device to cool down.
Î Turn on the appliance.
– Error occurs repeatedly.
Î Inform Customer Service
– Leak in the high pressure system
Î Check high pressure system and con-
nections for tightness.
Î Inform Customer Service
– The flame sensor turned the burner off.
Î Inform Customer Service
– System care detection defective
Î Inform Customer Service
Note: Burner can operate 5 more hours.
– System care bottle empty.
Î Replace the system care bottle.
Note: Burner operation no longer possible.
– System care bottle empty.
Î Replace the system care bottle.
– No power
Î Check power connection/conduit.
– Air within the system
Vent pump:
Î Set dosing value for detergent to "0".
Î With open hand spray gun turn device
on and off multiple times with the device
switch.
Î Open and close the pressure/quantity
regulation at the pump unit with the
hand spray gun open.
Note: By dismantling the high pressure
hose from the high pressure connection the
venting process is accelerated.
Î If detergent tank is empty, refill.
Î Check connections and conduits.
– Pressure is set to MIN
Î Set pressure to MAX.
– Sieve in the water connection is dirty
Î Clean sieve.
Î Clean the fine filter; replace it, if neces-
sary.
– Amount of water supply is too low.
Î Check water supply level (refer to tech-
nical data).
Water shortage symbol
Burner error symbol
Error symbol
Flame sensor symbol
System care detection symbol
System care symbol
Appliance is not running
Device is not building up pressure