Kärcher CUDA 7248, Руководство оператора

Страница: 12 / 56

12
Operations
Main Operating Components
Familiarize yourself with the main operating compo-
nents before operating the machine.
Control Panel
Wash Cycle Control
The wash cycle control is a 60-minute timer switch with
a hold feature. When set between 1 and 60 minutes,
the timer automatically shuts off the pump and turntable
when the wash cycle is complete. When set to
Hold ,
the pump and turntable run continuously until manually
shut off.
Heater Control
The heater control is a 12-hour timer switch. It controls
the heating element in the sump chamber. The heating
system is thermostatically set at the factory to reach a
high temperature of 180°F. The temperature is adjust-
able using the thermostat (See
Adjusting the Thermo-
stat ).
Skimmer Control
The skimmer control is a 30-minute timer switch. It
controls the automatic oil skimmer.
Turntable Jog Button
The turntable jog button enables you to manually rotate
the turntable with the door open. This feature is useful
for loading and unloading the machine; instead of
reaching to the rear of the wash chamber while loading
and unloading, you can rotate the turntable to easily
add or remove parts.
Low Water Indicator
The low water indicator light illuminates if the wash
solution in the sump is low.
Thermostat
The thermostat is located on the right side of the
heating element and thermostat enclosure. The ther-
mostat is factory-set to heat the wash solution to a
maximum temperature of 180°F.
Adjusting the Thermostat
To adjust the thermostat, rotate the control knob
clockwise to increase the temperature, or counterclock-
wise to decrease the temperature.
CUDA 7248 Operator’s Manual 9.801-712.0 - AA
Heater
Control
Wash Cycle
Control
Low Water
Indicator
Oil Skimmer
Control
Turntable
Jog Button
Increase/Decrease
Temperature