![background image](http://html1.mh-extra.com/html/kar-tech/micro/micro_installation-and-operation-manual_3453550005.webp)
MICRO REMOTE
4
the battery voltage is low and
requires charging. Plug in the
transmitter as soon as possible
after seeing the low battery
indicator.
See
BATTERY
CHARGING below.
The receiver module can identify
problems with the system in the
form of an error code. Check
the red indicator on the receiver
to diagnose system problems.
Then, refer to the ERROR CODE
CHART in this manual for
explanation of the error codes.
The green LED indicator will
blink on the receiver during
active operation.
TRANSMITTER AND
RECEIVER
SYNCHRONIZATION
Each radio remote system is
designed to operate with a
unique radio ID code and RF
channel sequence. Each receiver
is programmed to respond
only
to the transmitter with the
correct ID code/RF channel
sequence for which it is set. This
feature allows multiple systems
to work in close proximity to one
another without interference.
In the event that a transmitter
becomes damaged and a new
one is needed, the receiver can
be reprogrammed to respond to
the new transmitter. To teach
the ID code to the receiver, use
the following procedure.
*Please
note that if this procedure is
interrupted
before
it
has
completed, the system may
have intermittent operation:
1.
Turn the transmitter and
receiver off
2.
Press and hold the POWER
button for more than 10
seconds. LEDs should blink