Appendix A
103
•
LicenseIdleTimeout=1...100
– maximum time (in seconds), during
which the licensing module can maintain connection with an idle filtering
process that sends no data. After this timeout is over and if no requests
are received from the filtering process, the connection is terminated. The
default value is
30
.
•
LicenseDataTimeout=1...100
– timeout (in seconds) for read / write
operations for the socket used to interact with filtering processes. The
default value is
1
.
SPF daemon settings:
•
SPFDListen
– path to the socket file used by the SPF daemon to
interact with filtering processed. The default value is
/usr/local/ap-
mailfilter3/run/ ap-spfd.socket.
•
SPFDPoolSize=1...50
– number of simultaneously running child
processes of the SPF daemon. The default value is
5
.
•
SPFDMaxRequestsPerChild=50...10000
– maximum
number of
requests processed by one child process of the SPF daemon. After the
child process processes the specified number of requests, it is finished,
and the SPF daemon starts a new process. The default value is
1000
.
•
SPFDMaxQueueSize=10...1000
– maximum number of requests that
can be simultaneously placed to a queue for processing. The default
value is
200
.
•
SPFDCleanupInterval=30...3600
– frequency (in seconds) of the SPF-
daemon cache cleanups. The default value is
600
.
General settings of client modules:
•
ClientConnectTo
– address of the socket through which the client
module interacts with the filtering module. The format is
tcp:<host>:<port>
, where
<host>
is the IP address of the filtering
server,
<port>
is the connection port that specifies a network socket,
and the record in the format
unix:<path_to_file>
, where
<path_to_file>
is the path to the socket file, specifies a local socket.
•
ClientConnectTimeout=10...100
– timeout (in seconds) for establishing
a connection between the client module and the filtering process. The
default value is
40
.
•
ClientDataTimeout=10...100
– timeout (in seconds) for exchanging data
between the client module and the filtering process.
•
ClientOnError
– method of handling errors (unable to connect to the
filtering module, the timeout for exchanging data is exceeded, etc.).
Possible values:
