H50U Glass&Dish Washer installation and operation manual
- 10 -
Press button
Up“
”
to select wash cycle 90 seconds / 120 seconds /180 seconds,
respectively shown as C1, C2, C3 in rinse temp LCD. Display will disappear after 5
seconds when the cycle is chosen
（
B
）
Password setting
：
1
．
Pd Enter password
（
00-99
），
displayed in rinse temperature LCD;
2
．
PC Enter setting mode
，
press SET for 2sec
，
enter password to set a new mode
（
00-99
）
preset password is 00.
Alert
Type Display
Error
Rinse Temp LCD
E1
Booster Temperature Sensor(T1) Fault
E2
Booster Temperature Sensor(T2) Fault
Wash Temp LCD
E
Tank Temperature Sensor(T3) Fault
Alert
Door Open/Close
Mute
Door Open or Door Detector Fault
Rinse Pump
Keep Blinking
Rinse Pump Overload
Preparation
Place the strainer basket and the filter pan in proper location. Insert overflow pipes
(Fig. 5).
Close the door.
Press button "ON" once, to start the computer control, press again, the machine will
fill automatically.
Open the door and make sure the wash tank is full of water after fill cycle is complete.
If automatic chemical pumps are installed, please follow the manufacturer's
instructions.
The wash and rinse cycle will start automatically when the door is closed.
Please start washing after the tank reaching appropriate temperature.