13
ENGLISH
5) REPAIR
!
Tears or holes detected on sealing strips are not reparable by the kit delivered.
Please contact your retailer to know what action to take in this matter.
How to repair small punctures :
You can repair small punctures with the included repair kit. Please note that in order for the repair to be
successful, the humidity level should be less than 60%, temperature between 65° F/77° F or 18°C/25° C.
Avoid carrying out repairs in the rain or in direct sunlight.
To remove the inside bladder(s) please open the zippers on the inside of the kayak cover; each air chamber
features a zipper at the bow and a zipper at the stern of the kayak for quick and easy access. Check that the
tube is fully deflated and lies flat.
1 – Draw the shape of the patch exactly where it will be applied, cut a round patch at least 2-5 cm larger than
the cut/damaged area.
2 – Clean the damaged area and the corresponding side of the patch with a grease remover of the alcohol
type and allow for it to dry for 5 minutes.
3 – Apply 3 thin layers of glue on both the patch and the damaged area, allow for it to dry for 5 minutes
between layers until the glue feels tacky
4 – When the third layer of glue is dry, apply the patch without pressing and adjust the positioning if required,
press the air bubbles which may have formed under the patch by smoothing the patch with a round object
such as a spoon, do this procedure by starting in the centre of the patch towards the outside, clean the excess
glue with a solvent. Drying: 12 hours.
!
Avoid glue contact with the skin or the eyes.
Keep glue away from the reach of children
Perform all of your repairs in a dry, temperate and well-ventilated area
6) WARRANTY
Kangui warrants (legal warranty) to the original purchaser only, and from date of purchase, when any product
is used for normal recreational purposes, that the product is free from defects (weldings). The warranty
does not cover any puncture, cut or abrasion sustained in normal use or damage from unreasonable uses
or improper storage. After inspection of any product found defective, Kangui shall either repair or replace
the defective part or item as deemed necessary by Kangui. Kangui shall not be held liable for incidental and
consequential damages.
The main limitations to the application of the warranty are the following:
• The product must not be modified and/or fitted with a motor in excess of that allowable by the manufacturer or
used in any activities outside normal recreational use (such as races, rental, professional usage).
• Use in excess of the manufacturers recommended maximum load capacity.
• Pressure recommendations, assembly / disassembly and handling procedures must be strictly observed.
• The maintenance and the storage procedures must not be neglected.
• This warranty does not cover parts and accessories not supplied or recommended by the manufacturer or
defects resulting from the installation of such equipment on their products.
Your product was design according to standards established for a specific use.
Any modification or transformation endanger users and goes beyond this warranty.
!
