Kamstrup MULTICAL 402 Скачать руководство пользователя страница 67

Страница: 67 / 113

MULTICAL® 402

Kamstrup A/S · Technical Description · 5512-742_M1_GB_01.2016

Power supply

MULTICAL

Type 402-

402

must always be internally supplied with 3.6 VDC (

0.1 VDC) via the built-in supply plug.

฀

Supply

No module

Battery, 2 x AA

Battery, D-cell

230 VAC supply module

24 VAC supply module

The four above-mentioned supply modules are included in the comprehensive type test, to which MULTICAL

Note: MULTICAL

402

has been subjected. Within the framework of the type approval, the CE-declaration and the manufacturer’s
guarantee no other types of power supplies than the ones listed above can be used.

402 cannot be supplied by 24 VDC.

10.1

Built-in 2 x AA-cell lithium battery

The 2 x AA-cell lithium battery is in most applications sufficient to power MULTICAL

402 throughout an operating

period of 6 years (see paragraph 10.3).

Note: AA-cell lithium batteries include approx. 0.7 g lithium each and are therefore not

comprised by transport

restrictions.

Содержание MULTICAL 402


















































































































Результаты поиска

Содержание MULTICAL 402

Отзывы:

Kamstrup MULTICAL 402, Техническое описание, Страница: 67 / 113

Результаты поиска

Содержание MULTICAL 402

Отзывы: