Kamstrup MULTICAL 402, Техническое описание, Страница: 57 / 113

MULTICAL® 402
Kamstrup A/S · Technical Description · 5512-742_M1_GB_01.2016
57
7.11.3 Exit setup menu
When the value of the reading has been changed to the required value, you quit by pressing the main key
continuously for 5-6 seconds.
It should be checked whether the value is valid for the reading in question. If so, the value is saved and the new
value is displayed together with the “OK” symbol. If not, the old value is displayed without the ”OK” symbol.
The setup menu can be deactivated without saving the change in the following way:
1) Switch off the supply to the meter
2) Wait until the display is completely blank
3) Connect the supply without pressing any keys
Wait a moment without pressing any keys. The legal reading appears and the setup menu is deactivated.
Note: After four minutes without activating any keys, the setup menu is deactivated and the display returns to the
legal reading. If the “OK” is not displayed, no data have been saved.
7.11.4 List of readings supported by the setup menu
Readings supported by the setup menu:
Date
Clock
Input A (preset of register)
Input B (preset of register)
Meter no. of Input A
Meter no. of Input B
Primary M-Bus address
Note! Pulse values of Input A and Input B (FF and GG) cannot be changed via the front keys.