ZEUS-VD INSTALLER’S MANUAL
16
CHANGEING PARAMETERS USING THE SMS
COMMAND
You can send all programming parameters to the ZEUS4-VD by SMS command. Each SMS
command should start and stop with semicolon. If the confirmation need we must put “+” on the
beginning of the command.
The first SMS will be SMS with telephone numbers (TN1 –TN0). After the SMS command; PTN;
you’ll get following SMS:
;TN 0=0;TN1=0;TN2=0;TN3=0;TN 4=0;TN5=0;TN6=0;TN7=0;TN 8=0;TN9=0;
You’d like to change the TN0 (040 713 470), TN1 (+38643364850) and TN2 (041255630)
;TN0=040713470;TN1=+38643364850;TN2=041255630;TN3=0;TN4=0;TN5=0;TN6=0;T
N7=0;TN8=0;TN9=0;
When you put the “+” before SMS command than you’ll automatically get the return message with
currently programming values.
Example:
SMS to ZEUS4-VD:
;+TN0=040713470;TN1=+38643364850;TN2=041255630;TN3=0;TN4=0;TN5=0;TN6=0;T
N7=0;TN8=0;TN9=0;
Return SMS from ZEUS4-VD if you use +:
;TN0=040713470;TN1=+38643364850;TN2=041255630;TN3=0;TN4=0;TN5=0;TN6=0;T
N7=0;TN 8=0;TN9=0;
NOTE: You can use the same programming procedure for all parameters.
It is also possible to change just a few different parameters with one SMS. Consider that the SMS
should not be longer than
160 characters
(included space characters).
For example, you want to change the following parameters and you want to get the confirmation
SMS back:
TN1, IN1, IN2, OS3, OS4; ID1, LN1 and CRE
You will create the following SMS:
;+TN1=+38640713470;IN1=1;IN2=1;OS3=15;ID1=120;LN1=1;CRE=4;
Page 37
-
Send the SMS to the ZEUS4-VD telephone number and in a few seconds you will get the
replay