ZEUS-VD INSTALLER’S MANUAL
12
CHECKING AND CHANGING THE SYSTEM STATUS
(ON/OFF)
12.1
CHECKING SYSTEM STATUS BY SMS COMMAND
Sending this command to the ZEUS4-VD you will get back the SMS with state of the system.
Command
;SYS;
The replay SMS can be:
⇒
;SYS= ON; System is ON (active inputs)
⇒
;SYS= OFF; System is OFF (inputs are not active)
12.2
CHECKING SYSTEM STATUS BY DTMF COMMAND
If you want to check the system status (system ON/OFF) with DTMF command then you should
call the ZEUS4-VD and after beep press command
“62”
. You can hear following response:
⇒
1 beep ……system is ON (all alarm inputs are enable)
⇒
3 beeps……system is OFF (all alarm inputs are disable)
12.3
CHANGING SYSTEM STATUS OFF TO ON (SYSTEM ON)
Sending this command to the ZEUS4-VD you will switch the system ON.
Command ;
SYS=1
;
If you want to get the confirmation SMS back then write “
+
” before SMS command:
Command ;+
SYS=1
;
12.4
CHANGING SYSTEM STATUS ON TO OFF (SYSTEM OFF)
Sending this command to the ZEUS4-VD you will switch the system OFF.
Command ;
SYS=0;
If you want to get the confirmation SMS back then write “
+
” before SMS command:
Page 33
Command ;+
SYS=0
;
