ZEUS-VD INSTALLER’S MANUAL
9.8.1
Programming table for the MAIN POWER LOST and telephone numbers linking
ZEUS4-VD - GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number (Default)
Description
LN5
Telephone number from TN1 to TN0
Example:
ZEUS4-VD - GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number (Default)
Description
LN5
12
Main Power Lost SMS will be send to TN1 and TN2
9.8.2
LN remote programming by SMS
For the upper example send the following SMS from the host phone to the ZEUS4-VD:
;LN5=12;
If you want to get the confirmation SMS back then write “
+
” before SMS command:
;+LN5=12;
9.9
LOW BATTERY AND TELEPHONE NO. LINKING – LN6
The ZEUS4-VD can control battery level and it will send 3 SMS when reach following voltage
level on battery: 11,5V, 10,5V and 9V. It will send the SMS “Low Battery” and battery level in
volts together.
The low battery level can be detected when the unit works without main power supply.
At the moment when the battery power will be higher then 11,5V the ZEUS4-VD will send the
SMS message with the following text: “Low Battery restored”.
NOTE:
The “Low battery” will be detected when the ZEUS4-VD operates only with back-up battery and
it is not connected on the Main Power Supply.
9.9.1
Programming table for LOW BATTERY and telephone numbers linking
ZEUS4-VD - GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number (Default)
Description
LN6
Telephone number from TN1 to TN0
Page 18
