ZEUS-VD INSTALLER’S MANUAL
9.6.2
OD remote programming by SMS
For the upper example send the following SMS from the host phone to the ZEUS4-VD:
;OD1=1;OD6=2;OD7=4;OD8=3;
If you want to get the confirmation SMS back then write “
+
” before SMS command:
;+OD1=1;OD6=2;OD7=4;OD8=3;
9.7
INPUTS AND TELEPHONE NUMBERS LINKING
It is possible to link each number or any combination of numbers to any of the four corresponding
inputs.
9.7.1
Programming table for linking the inputs and telephone numbers – LN
ZEUS4-VD - GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number (default)
Description
LN1
Input & telephone No. linking for 1
st
alarm input (TN1 – TN0)
LN2
Input & telephone No. linking for 2
nd
alarm input (TN1 – TN0)
LN3
Input & telephone No. linking for 3
rd
alarm input (TN1 – TN0)
LN4
Input & telephone No. linking for 4
th
alarm input (TN1 – TN0)
LN5
Power down and telephone No. linking (TN1 – TN0)
LN6
Low Battery and telephone No. Linking (TN1 – TN0)
LN7
Periodic test SMS and telephone No. linking (TN1 – TN0)
LN8
SIM card refill and telephone No. linking (TN1 – TN0)
LN9
Tamper switch and telephone No. linking (TN1 – TN0)
Example:
Page 16
ZEUS4-VD - GSM PROGRAMMING TABLE
SIM CARD PHONE BOOK
Name
Number
Description
LN8
12
Refill SIM – SMS will be send to TN1 & TN2
LN1
13
Input1 will call/send SMS to TN1 & TN3
LN2
123
Input2 will call/send SMS to TN1, TN2 & TN3
LN3
5
Input3 will call/send SMS to TN5
LN4
45
Input4 will call/send SMS to send to TN4 & TN5
LN7
12
Periodic Test SMS will be send to TN1 & TN2
