User Manual
C3-50
36
9: Door heating power factor
•
To avoid water condensation on the doors a weak heater is installed on inner side
of doors and the chamber edge. In case of inconvenient condensation at some
temperatures you may higher/lower this value.
Factory default values
Tset Factor
1.00x
10: Chamber temperature PID settings
Factory default values
Kp-Gain
2.0
Ti-Integral time [s]
150.0s
Td-Rate time
0.0
11: Thermoelectric cooler
–
chamber PID settings
Factory default values
Kp-Gain
30.0
Ti-Integral time [s]
50.0s
Td-Rate time
0.0
12: Rh AIR PID settings
Factory default values
Kp-Gain
6.0
Ti-Integral time [s]
150.0s
Td-Rate time
0.0
13, 14: Information valid only for service personal!
15: Communication port setup
16: Selection of menu language
17: Display contrast setup
