User Manual
C3-50
35
1-4: Temperature probe correction
•
For temperature probe 4 corrections points are defined.
For each correction point correction can be set. To change value use .
5-6: Rh probe corrections
•
Correct Rh Offset and Factor.
To change values use .
7: Time count-down tolerance (temperature)
•
You can set the time of each temperature step. The countdown will start when
temperature is in set limits.
For example:
Set temperature: 50°C
Set time: 60 min
Set START TIME COUNT IN RANGE : +-
1°C
The countdown will start when the temperature will be betw
een 49.0°C and 51.0°C !
8: Time count-down tolerance (humidity)
•
You can set the time of each temperature step. The countdown will start when
humidity is in the set limits.
For example:
Set humidity: 50%
Set time: 60 min
Set COUNT DOWN TOLERANCE IN HUMIDITY RANGE: +-5%
The countdown will start when humidity will be between 45% and 55% !
ATTENTION:
Time count-down begins when both parameters (temperature and humidity) are in their limits!
