KAM E-IAS, Руководство пользователя

Страница: 17 / 17

EIASMANUAL 0918 KAM CONTROLS, INC.
16
M A I N T E N A N C E C O N T I N U E D
Replace the 2-026 O-ring located inside sampling section of the probe, at the same level as the hex section.
(Fig. 4-12)
Apply grease to the 2-026 O-ring previously installed.
Apply Loctite 242 to the Sample Chamber thread.
Screw the sampling section back on to the sample chamber by holding the sample chamber with 1 1/2" wrench
and turning the bottom section of the probe clockwise using a 1 3/4" wrench.
30.
31.
32.
33.
34. Install probe body on pipeline and then attach the motor assembly using a 3/16" Allen wrench and the (4) 1/4" x
1/2" socket cap screws. (Fig. 4-13)
FIG. 4-12
FIG. 4-13
2-026 O-ring
Sample
Chamber
Socket Cap
Screws