Kaisai KMK-60RY1, Руководство по обслуживанию

Страница: 105 / 114

M thermal Split
102 202004
Midea
M t
her
ma
l S
pli
t Ser
vice M
anual
Procedure 4.23.4
PP
Water side heat exchanger water inlet /
outlet temperature sensor is loose
1
Yes
Ensure the temperature sensor is
connected properly
No
Water side heat exchanger water inlet /
outlet temperature sensor has
short-circuited or failed
2
Yes
Replace the temperature sensor
No
The 4-way valve is blocked or damaged
3
Yes
Replace the 4-way valve
No
Replace outdoor main PCB
Notes:
1. Water side heat exchanger water inlet temperature sensor and water side heat exchanger water outlet temperature sensor connections are port CN6 on
the hydronic box main PCB (labeled 10 in Figure 4-2.1 in Part4, 2.2 "Main PCB for Hydronic System").
2. Measure sensor resistance. If the resistance is too low, the sensor has short-circuited. If the resistance is not consistent with the sensor’s resistance
characteristics table, the sensor has failed. Refer to Part 2, 1.2 “Hydronic Box Layout” and to Table 4-5.3 in Part 4, 5.1 “Temperature Sensor Resistance
Characteristics”.
3. Restart the unit in cooling mode to change the refrigerant flow direction. If the unit does not operate normally, the 4-way valve is blocked or damaged.
Midea CAC Confidential
M thermal Split
202004 103
4.24 C7 Troubleshooting
Digital display output 4.24.1
Description 4.24.2

Transducer module temperature too high protection

Split stops running.

Error code is displayed on hydronic box main PCB and user
interface.
Possible causes 4.24.3

Power supply voltage of the unit is low.

The space between the units is too narrow for heat exchanger.

Heat exchanger is dirty or something is block on the surface.

Fan is not running.

Water flow rate is low.

Water outlet temp. sensor is loosen or broken.
Midea CAC Confidential
Split