12.5
STARTING
UP
3 phase-version 400V (option)
Before connection with electric power, an electrician should check that your CEC-plug 5
poles (high power electric socket):
All 3 phases having power (400 V / 50 Hz) and the rotary is right side (as per DIN)
In case one phase has no electric power the grinding, motor of the SSG 600 will be
destroyed (the winding will burn out). In case, we will not replace under warranty. After
checking successfully the CEC-plug and socket 5 poles, connect the machine with
electric current.
Next connect with air pressure (only for SSG 600 automatic), therefore use the supply
maintenance unit and adjust the operation pressure to 5 - 5,5 bar (in this range, the
machine works at it's best). The air consumption is approx. 50 L/min.
9
13.
OPERATION
The saw blades must be cleaned blank before sharpening.
Please use some steel wool with soap and warm water.
Only with a clean surface, a regular transport is granted!
14.
GENERAL
DIRECTIONS
HSS-circular saw blades:
•
Only to be sharpened with the supplied corundum grinding wheel
•
With this machine, a setting of the teeth is not possible
Carbide tipped circular saw blades:
•
Only sharpen with a diamond wheel
•
In order to keep the proportion of inside- and outside of teeth, please pay attention
to the following: Re-sharpen the back of tooth only each 4-6 times. This means
after having sharpened the inside tooth 4-6 times, then sharpened one time the
back tooth.
•
In the further sequel of this manual HSS circular saw blades will not be mentioned
any further, as the complete adjustment is identical to carbide tipped - circular saw
blades.
Содержание SSG 600-A-DC
