![background image](http://html1.mh-extra.com/html/kaindl/ssg-600-a-dc/ssg-600-a-dc_operating-instruction_649570011.webp)
17.
ADJUSTMENT
OF
INSIDE
TOOTH
•
Open motor fixation screw (Picture 2/39)
•
Place motor graduation 0°. The grinding wheel must show to the right side
.
•
Open fixation of transport cylinder (Picture 2/51)
.
•
Adjust the feed cylinder on the position rod side, in order the fixation lever is
parallel to the outer edge of the saw blade and fix again
.
•
Transport the saw blade by using the feed lever (Picture 2/53) to the stop dog
(Picture 4/79) Pay attention that the ball is pressed inside it's sleeve completely.
•
Compress the cylinder and then move back the unit with feed lever (Picture 2/53)
by adjusting how many teeth could be transported per feed. Now fix the cylinder
with the clamping lever
.
•
To confirm of the advancing lever (Picture 2/53) against the stop (Picture 4/79) and
drive back to the piston of transport cylinder completely retracted, control once
more the desired number of teeth.
•
Adjust angle of inside tooth as per the specification of the saw blade manufacturer
with the fixation screw of the porting arm (Picture 2/50)
.
•
Angle can be determined by moving the grinding wheel
.
•
Limit the grinding depth stop (Picture 3/70).
•
Check the adjustments of grinding and transport manually.
11
Содержание SSG 600-A-DC
