Kaindl SSG 600-A-DC, Руководство по эксплуатации

Страница: 7 / 34

7
7.
DEMANDS OF THE OPERATING PERSONNEL
The performance, precision and lifetime of a machine, depends among other factors, also
from the set up.
The machine is provided with a corrosion protection, this cover should be removed before
use. The plank parts should be oiled slightly.
When setting up, please pay attention, that the machine is fix, vibration free in an optimal
working height (80-85 cm working table height for the table version and 83 cm with
machine stand) to grant a perfect operation of the machine.
8.
SET UP
The saw blade sharpening machine SSG 600 may only be used by persons who are
familiar with this manual are allowed to work with this machine. In each case a safety
goggle and ear protection should be placed near the machine.
After unpacking, glue the felt hats on the cast iron feet of the base plate.
The advantages are, the machine is lined up within a few minutes on a table or working
table and no vibration will appear.
9.
TABLE VERSION
After unpacking, place the machine stand with door side in front and put the tub on the
stand (fixation borings for the automatic box on the left).
Place the machine inside the tub (2 persons will be needed).
Now the saw blade sharpening machine is screwed up with the tub and the machine
stand on the cast iron feet of the base plate.
10.
VERSION WITH MACHINE STAND
Only for dry rooms, from +5 to +50° Celsius, max 90% humidity not condensing.
11.
ENVIRONMENTAL CONDITIONS FOR SET UP