Kaindl SSG 600-A-DC, Руководство по эксплуатации

Страница: 5 / 34

• Electrical connection only by an electrician
.
• Only in dry rooms
.
• While grinding always wear your safety glasses
.
• Only use original Kaindl grinding wheels, which correspond
the norms
EN 12413 or EN 13236. The grinding wheel must be approved for the speed of
the grinding spindle.
• As the conic pressure level, when sharpening HSS saw blades, may get up to
83 dB/A, we propose wearing an ear protection.
• Carbide tipped circular saw blades are only allowed to sharpen with a dust
exhaust. The diameter of the exhaust plug is 36 mm. An exhaust power of
3000 l/min is sufficient
.
• For carbide tipped circular saw blades with cobalt an additional exhaust filter
cat. M is recommended.
• Let run grinding wheel always downwards.
• The mounting of the retrofit kit is only allowed at Kaindl company.
• Changes of the electrical equipment are only allowed with the agreement of the
manufacturer and have to be done by an electrician.
• Grinding by use of cooling liquid, only with agreement of the manufacturer.
• Residual risk: By using the automatic, neglectable squeezes on the transport
mechanism may occur.
4.
GENERAL SAFETY ADVICE
5
2.
DIRECTED USE
The saw blade sharpening machine SSG 600-M-LF and SSG 600-A-DC is exclusively
determined for sharpening of HSS and carbide tipped circular saw blades with range of
Ø 100-600 mm which having a clear geometric tooth shape. For sharpening of carbide
tipped saw blades an exhaust is recommended (see chapter "Exhaust").
For other operations, as listed here, the machine is not destined for - and goes to
unauthorized use! The directed use includes also reading this operation manual, as well
as keeping all containing cirections of use - especially the safety information.
In case the saw blade sharpening machine is not used as per intended purpose, a save
operation cannot be granted. For all material- and personal damages, arising by not
intended use, not the manufacturer, but the operator of the saw blade sharpening
machine is responsible.
3.
PREDICTABLE WRONG APPLICATION
The use as a table machine for manually guided grinding of workpieces, such as chisel,
sheet metal, screwsdriver, etc. is not allowed!