Kaindl SSG 600-A-DC, Руководство по эксплуатации

Страница: 15 / 34

15
23.
CHANGE OF GRINDING WHEEL
Dismount the grinding wheel cover (Picture 1/4) with allen key SW 2,5 (included), while
turning out the 3 screws (M4 x 12) and pull off the grinding wheel cover.
Now open the nut (SW 19) on the motor spindle, while holding the motor spindle with an
allen key (SW 6) in the centre.
After having tuned out the nut, pull the wheel together with the support from the motor
spindle. The mounting of the new wheel is made in the reverse sequence.
23.2
MOUNTING ON THE GRINDING WHEEL
Place the grinding wheel inside the dismantled grinding wheel support and don't forget
the cardboard for the grinding wheel.
(Cardboard - grinding wheel - cardboard).
Turn the flange nut by hand on the grinding wheel support.
Take the socket screw wrench (included) and tightly close the flange nut.
24.
DISPOSING OF THE GRINDING WHEEL
Old grinding wheel can be disposed as "rest garbage".
Diamond wheels, whose body material is aluminium, give to aluminium scrap metal.
ATTENTION!
Never operate the SSG 600 without correctly mounted grinding wheel protection!
After changing the grinding wheel, a trial run of at least one minute is always to perform.
In unusual behavior, the machine is switched off!