Kaindl KSS, Руководство по эксплуатации

Страница: 4 / 9

Basic safety advise
Duty of taking care by the user
The sharpening platform has been designed and constructed under consideration of an endangering analysis and
careful selection of observed harmonized norms, as well as further technical specifications.
The machine corresponds to the state of the art and grants a maximum of safety.
This safety can only be achieved in daily work, when all necessary steps are taken by the user of the KSS. It is his
duty to take care, plan and control these steps.
The operator has above all to take care that:

the KSS is used as directed (see chapter description)

the KSS is used in flawless, workable condition.
required protection equipment for the operating personnel is available and will be used.
the operation manual is always in a readable condition, complete and available near the machine.
the sharpening platform is only operated by personnel, which is familiar with the operation manual and
especially with the included safety advises.

all safety and warning instructions are not removed from the KSS and kept readable.
Fundamental safety advise
The KAINDL has been designed under consideration, that even for untrained users, a safe operation is ensured.
Par example, a steel/diamond wheel has been selected, which cannot break, even under maximum stress.
Anyway by working with the
KSS, some things have to considered for your own safety:
The KAINDL sharpening platform KSS is only allowed to be operated with the break proof and
destined Kaindl-diamond looking through grinding wheel (Order No.: 3SS02000)

Pay attention that for all adjustment works, the electric plug is pulled off.
During all grinding- and sharpening works, absolutely wear a safety glass (Safety glass is included)

Just sharpened saw blades having sharp teeth. Always wear safety gloves.
No not wear jewellery or clothes which may caught by turning parts. Cover long hair by a headband or
hair net.
Inhalation of fine dust is dangerous to your health. It is advisable to always wear a dust mask while
working
Advise: as per our knowledge so far, by occasional grinding, only 50 % of the MAK – rate (max working
place concentration) will be reached.
The machine is only allowed to be operated by personnel which are familiar
with this manual and are acting correspondingly !