Kaindl KSS, Руководство по эксплуатации

Страница: 9 / 9

3.2 Sharpening of outside tooth
In most of the cases you can sharpen the outside tooth using the same stop dog adjustments. Only the drill
machine has to be moved to another position. For the positioning, always fix the saw blade with the magnet (2),
to prevent the blade to get out of place. Open the ball fixation screw (10) on the ball joint (9) and turn the drill
machine in the way that the grinding wheel gets parallel to a tooth you can reach easily (picture 8). Fix the drill
machine in this position with the ball fixation screw (10).
Move forward again with the feeding screw (8) to the back of tooth until the tooth is sharpened correctly. Also
mark this tooth with a felt pen and sharpen analogous as described in chapter 3.1 “sharpening of inside tooth.
3.3 Sharpening of alternating saw blades
The sharpening of alternating saw blades happens in the same way as sharpening of straight teeth. Only
your grinding wheel has to be adjusted to the incline of the tooth (picture 9) and instead of sharpening each
tooth, only every second tooth has to be sharpened in this position. Then adjust the saw blade to the incline
of the following tooth and here also sharpen every second tooth until you come to the mark of the felt pen
General information about the flexibility of the KSS
Differing to the information written here, the platform allows a wide range of individual adjustments.
You may adjust e.g. as pivot the left or right stop dog. By shifting the stops, nearly each tooth angle can be adjus-
ted. This makes it easy to flexibly adjust the platform as per your own requirements and your special tools.
Version Feb. 2003, Technical changes may be done without notification
Picture 7 Picture 8
Picture 9
Advise: depending on tooth size of your
saw blade, use the stronger or smaller
stop dogs as pivot.