background image

11.3  KAESER AIR SERVICE

KAESER AIR SERVICE offers:
■ Authorized service technicians with KAESER factory training.
■ Increased operational reliability ensured by preventive maintenance.
■ Energy savings achieved by avoidance of pressure losses.
■ The security of genuine KAESER spare parts.
■ Increased legal certainty as all regulations are kept to.

➤ Why not sign a KAESER AIR SERVICE maintenance agreement.

The advantages:

Lower costs and higher compressed air availability.

11.4  Service Addresses

Addresses of KAESER representatives are given at the end of this manual.

11.5  Spares for service and repair

Use this parts list to plan your material requirement according to operating conditions and to order

the required spare parts.

Personal injury or machine damage due to incorrect working on the machine!

Incorrect inspection, service or repair can damage the machine or severely impair its func‐

tion. Personal injury may result from machine damage.
➤ Inspections, preventive maintenance or repair tasks not described in this manual must

not be carried out by unqualified personnel.

➤ Other tasks, not described in this service manual, must be carried out by specialist work‐

shops or KAESER Service.

11 Spares, Operating Materials, Service

11.3 KAESER AIR SERVICE

No.: 9_9446 01 USE

SERVICE MANUAL    Screw Compressor  
M26  

109

Содержание M26

















































































































































































































Отзывы: