KAESER M 64, Руководство оператора

Страница: 137 / 344

Fig. 53 Draining the compressor cooling oil
1
Oil separator tank
2
Oil filler plug
3
Oil separator tank drain plug
4
Oil cooler
5
Oil cooler drain plug
6
Gasket
➤ Remove the plug
2
from the oil separator tank filling port.
Draining the cooling oil from the oil separator tank:
The oil separator tank can be drained by a separate oil drain plug located on the underside of the
tank (accessible from underneath through the access hole in the floor pan).
1. Place the oil receptacle below the corresponding drain hole in the floor pan.
2. Unscrew the drain plug
3
and allow the cooling oil to drain into the receptacle.
3. Fit a new gasket on the drain plug and screw it back in again.
Draining the oil from the oil cooler
The oil cooler can be drained by a separate oil drain plug located on the underside of the oil collec‐
tion box (accessible from underneath through the access hole in the floor pan).
1. Place the oil receptacle below the corresponding drain hole in the floor pan.
2. Unscrew the drain plug
5
and allow the cooling oil to drain into the receptacle.
3. Fit a new gasket on the drain plug and screw it back in again.
Draining the oil from the heat exchanger:
The heat exchanger can be drained by a separate oil drain plug located on the underside of the
heat exchanger (accessible from underneath through the access hole in the floor pan).
10 Maintenance
10.4 Compressor Maintenance
No.: 9_5898 26 E
Operator manual Portable compressor
M 64
125
Option db
RAMIRENT