KAESER M 64 Скачать руководство пользователя страница 216 | Manualshive

Страница: 216 / 344

KAESER M 64 Скачать руководство пользователя страница 216

Frozen moisture can damage components, valve diaphragms and gaskets.
The following measures also apply to machines not yet commissioned.

Please consult with KAESER if you have questions to the appropriate storage and commis‐

sioning.

NOTICE

Moisture and frost can damage the machine!
➤ Prevent ingress of moisture and formation of condensation.
➤ Maintain a storage temperature of >0 °C.

➤ Store the machine in a dry place, free from frost if possible.

12.4 Disposal

When disposing of a machine, drain out all liquids and remove old filters.

Precondition The machine is decommissioned.

1. Completely drain the fuel from the machine.
2. Completely drain the cooling oil and engine oil from the machine.
3. Remove used filters and the oil separator cartridge.
4. Drain the coolant from water-cooled engines and systems.
5. The battery has been removed.
6. Hand the machine over to an authorised disposal expert.

➤ Operating materials and components contaminated with fuel, cooling oil or engine oil

must be disposed of in accordance with local environment protection regulations.

➤ Old batteries are hazardous waste and must be disposed of correctly in accordance with

local environment protection regulations

12 Decommissioning, Storage and Transport

12.4 Disposal

204

Operator manual Portable compressor
M 64

No.: 9_5898 26 E

RAMIRENT

«
...
214
215
216
217
218
...
»

Содержание M 64

























































































































































































































































































































































Отзывы:

Нет отзывов