KAESER M 64 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 344

KAESER M 64 Скачать руководство пользователя страница 47

Item

Sign

Meaning

380

Toxic exhaust gases into areas of work!
➤ Never use the machine in enclosed spaces, only in the open.
➤ Direct the exhaust fumes to the open air.
➤ Do not inhale dangerous gases.

450

Loud noise and compressed air blast!

Damage to hearing and injury if ball valve is opened without a compressed air

hose being connected.
➤ 1. Connect a compressed air hose.
➤ 2. Open the ball valve.

600*

Risk of fatal injury caused by dismantling valves (spring-loaded or under pres‐

sure)!
➤ Do not open or dismantle valves.
➤ Call an authorised Service Technician in the event of a fault.

620
621

Risk of serious lacerations or even severing of extremities (fingers) from rotating

components.
➤ Operate the machine only with closed safety guards, access doors and pan‐

els.

➤ Shut down the machine before opening a door or canopy and prevent from

restarting.

850****

Risk of fatal injury caused by contact with live components!
➤ Take protective measures.

1222***

Danger!

Mortal danger from CO, CO₂ or toxic gasses.
➤ Draw in only surrounding air of fresh air quality.
Danger!

Danger to health from discharge of oily compressed air.
➤ Maintain surrounding air temperature b1,5 °C and 30 °C.
➤ Check the oil indicator at least once a day.

* Position within the machine

*** only machines with option dc

**** only machines with option ga

Tab. 63 Safety signs

3

Safety and Responsibility

3.7

Safety signs

No.: 9_5898 26 E

Operator manual Portable compressor
M 64

35

RAMIRENT

«
...
45
46
47
48
49
...
»

Содержание M 64

























































































































































































































































































































































Отзывы:

Нет отзывов