KAESER M 64, Руководство оператора

Страница: 39 / 344

Electricity
Touching voltage carrying components can result in electric shocks, burns or death.
➤ Allow only qualified and authorised electricians or trained personnel under the supervision of a
qualified and authorised electrician to carry out work on electrical equipment according to elec‐
trical engineering regulations.
➤ Check regularly that all electrical connections are tight and in proper condition.
➤ Switch off any external power sources.
For example, the connections to the electrical engine cooling water pre-heater.
Forces of compression
Compressed air is contained energy. Uncontrolled release of this energy can cause serious injury
or death. The following information concerns work on components that could be under pressure.
➤ Wait until the compressor has automatically vented (check the pressure gauge: it must read 0
bar)
➤ Then open an outlet valve carefully to ensure that the line between the minimum pressure /
check valve and the compressed air outlet is vented.
➤ Do not carry out welding, heat treatment or mechanical modifications to pressurized compo‐
nents (e.g. pipes and vessels) as this influences the component's resistance to pressure.
The safety of the machine is then no longer ensured.
Compressed air quality
The composition of the compressed air must be suitable for the actual application in order to pre‐
clude health and life-threatening dangers.
➤ Use appropriate systems for air treatment before using the compressed air from this machine
as breathing air (fresh air reinforcement) and/or for the processing of foodstuffs.
➤ Use foodstuff-compatible cooling oil whenever compressed air is to come into contact with
foodstuffs.
Spring forces
Springs under tension or compression store energy. Uncontrolled release of this energy can cause
serious injury or death.
Minimum pressure / check valves, pressure relief valves and inlet valves are powerfully spring-loa‐
ded.
➤ Do not open or dismantle any valves.
Rotating components
Touching the fan wheel, the coupling or the belt drive while the machine is switched on can result
in serious injury.
➤ Do not open the service doors or panels while the machine is running.
➤ Prior to opening the service doors or the canopy, switch off the engine, disconnect from power
source and secure against unintended reactivation.
➤ Wear close-fitting clothes and a hair net if necessary.
➤ Ensure that all covers and safety guards are in place and secured before re-starting.
3 Safety and Responsibility
3.5 Dangers
No.: 9_5898 26 E
Operator manual Portable compressor
M 64
27
RAMIRENT